PAVEMENT TEMPERATURE AND THE RESULTS OF TESTS CONDUCTED USING CONVENTIONAL METHODS

Authors

  • Bussurmanova Akkenzhe Yessenov University, Aktau, Kazakhstan Author
  • Viktors Haritonovs Riga Technical University, Riga, Latvia Author

DOI:

https://doi.org/10.56525/s6yy5979

Keywords:

bitumen, super pave, rheological properties, road construction

Abstract

To perform all experimental procedures and computational analyses in accordance with the adopted methodology, the climatic conditions of the Republic of Kazakhstan were considered as a representative case study. Initially, the design air temperature was determined with a specified level of statistical reliability. For this purpose, meteorological data obtained from stations located in proximity to the study area were processed and incorporated into the calculations.

According to the Superpave methodology, pavement temperature determination is based on the analysis of climatic variations over a 20-year period. The analysis showed that the average shaded air temperature during seven consecutive hottest days in a given year is 38.7 °C. It was established that, for any particular year, there is a 50% probability that the air temperature will be either higher or lower than this value. Therefore, adopting a summer design temperature of 38.7 °C alone is inappropriate, since, for example, over a 14-year period, approximately seven years may experience higher temperatures. Consequently, assuming a normal probability distribution for this parameter would lead to inaccurate results.

The calculations were carried out using climatic data from the last 20 years, reflecting recent climate variability affecting asphalt concrete pavements in Kazakhstan. Within the Superpave framework, test methods for evaluating the rheological behavior and low-temperature resistance of bituminous binders were described, taking into account both short-term and long-term oxidative aging. These properties were assessed using the bending beam rheometer (BBR) method. In addition, the testing requirements and specific characteristics of mineral fillers were considered, and the methodology for determining the asphalt concrete mixture composition, including the calculation of the optimum bitumen content, was examined.

Downloads

Download data is not yet available.

Downloads

Published

2026-06-18