JUSTIFICATION OF THE PARAMETERS OF THE PDC CHISEL OPERATION, TAKING INTO ACCOUNT THE GEOMETRY OF THE CUTTERS AND THE CONDITIONS OF ROCK DESTRUCTION
DOI:
https://doi.org/10.56525/e1by0r94Keywords:
PDC chisel, PDC cutter, rock fracture, mechanical drilling speed, axial load, rock hardness, boreholeAbstract
The features of the interaction of polycrystalline PDC diamond cutters with rock at the bottom of the well are considered. Despite the good cutting properties, the resource of such materials is often insufficient when drilling hard rocks. The most common are blade bits equipped with composite diamond-containing materials (CAM). Based on the source material, geometric and technological factors that determine the depth of the cutter and the expected mechanical drilling speed are systematized. The main attention is paid to the design of the ED PDC-161 chisel with a pair of weapons "PDC cutter – superhard cylindrical element", the distribution of axial load between the cutters and the influence of rock hardness. It is shown that taking into account the round shape of the working part of the cutter, the negative front angle and the area of the contact segment makes it possible to increase the validity of drilling mode calculations. For a computational example with an axial load of 80 kN, a rotational speed of 1.5 rpm, four incisors at one radius, and a rock hardness of 3 kN/mm according to A. A. Schreiner, an embedding depth of about 1,185 mm and an estimated velocity of 25.5 m/h were obtained. The proposed approach is intended for engineering forecasting of the operation of PDC chisels in various geological and technical conditions.




